Main Application and Characteristic
1. The equipment is mainly used for automatically straighten round or flat wire, stainless steel wire, galvanized wire, aluminum wire, copper wire, and cut automatically according to the preset length.
2. There are two kinds of models: Traditional Mechanical Model and Numerical Control Hydraulic Model.
3. "Traditional Mechanical Model Automatica Wire Straightening and Cutting Machine", need to set the straightening and cutting length manually, then the machine will do that automatically.
Operation and maintenance are simple. It is mainly used for straightening and cutting the wire with diameter less than 10 mm and the maximum cutting length is less than 2 metres.
4. "Numerical Control Hydraulic Model Automatica Wire Straightening and Cutting machine", processing performance is strong, almost can process any diameter, any length of wire, high degree of automation, automatically set straightening and cutting length, adopted with the safety device and automatic counting & stop system. Mainly used for straightening and cutting building cold-rolled steel wire and rebar, hot-rolled steel wire, hot-rolled round steel wire and cold-rolled steel bar etc...
5. According to customer requirements, can customized produce special kinds of straightening and cutting machine.
Technical Parameter
| Parameter/Model | Traditional Mechanical Model | Numerical Control Hydraulic Model |
| SC0.8-2.5 | SC2-5 | SC5-9 | SC9-12 | SC4-12 | SC6-14 | SC8-16 |
| Wire Diameter | 0.8-2.5MM | 2-5MM | 5-9MM | 9-12MM | 4-12MM | 6-14MM | 8-16MM |
| Max Cutting Length | 0-1000
MM | 0-2000
MM | 0-2000
MM | 0-2000
MM | 200-
30000
MM | 800-
50000
MM | 800-
60000
MM |
| Straightening Speed | 15-22
M/Min | 16-24
M/Min | 16-24M/Min | 16-26
M/Min | 20-50
M/Min | 20-60
M/Min | 20-70
M/Min |
| Motor Power | 0.55+
0.55KW | 0.55+
1.55KW | 1.5+
5.5KW | 2.2+
7.5KW | 3+3+10
KW | 4+4+11
KW | 5+5+12
KW |
